PixelGrid
PixelGrid Flex HD
Scalable 1080p AV-over-IP extension and video wall system
Put any 1080p source on any screen, or across a video wall, using a standard network switch. PixelGrid Flex HD encodes at each source and decodes at each display, so a signage network, a campus or a multi-screen venue grows one endpoint at a time.
PixelGrid Flex HD distributes high-definition video and audio to many displays over a standard 100M/1G network switch. H.265/H.264 compression keeps the bandwidth low while preserving video quality.
It has multi-layout video wall processing, flexible audio routing and full system control, for digital signage, matrix switching and enterprise distribution.
System control and network
Matrix switching and multi-unit set-ups work without a central hardware processor. Control it from the front-panel buttons with their LED channel display, the built-in web interface or TCP/IP.
Each encoder sends a main stream and a substream in H.265/H.264 at once, so a signal can be monitored remotely in VLC media player.
It runs on standard managed Layer 3 Gigabit switches with multicast, IGMP snooping and unregistered multicast filtering turned on.
Features
- Up to 1920×1200 at 60 Hz 4:4:4, 4.95 Gbps video bandwidth
- HDMI 1.3 and HDCP 1.4
- Up to 100 m (328 ft) over one Cat5e/6/6A/7 cable
- Point-to-point, multicast, distributed matrix and video walls up to 9×9
- LPCM 2.0 audio, with analogue embedding and extraction on a 3-pin Phoenix connector
- Powered by PoE (802.3af Class 3, PD) or a 12 V/1 A locking connector
- Up to 8 units in 1U horizontally, or 12 in a 4U enclosure vertically
- Q-SYS control plugin, for Q-SYS Designer 10 or later
Categories
Q-SYS control plugin
-
Every encoder and decoder at a glance
Set up to 100 encoders and 100 decoders in Properties and enter the controller’s Control LAN address. Status is polled every 2 seconds, so changes show about 2.5 seconds after a command.
Download the Q-SYS plugin, version 1.0.1 -
Routing
Choose each decoder’s source, confirmed by the controller, or switch all decoders at once. A source number input suits wiring and snapshots, with video, IR, RS-232 and USB locks.
-
Preview
16:9 snapshots of each encoder through the controller, refreshed automatically, with the RTSP main and sub stream addresses.
-
Tools
Send a raw command and read the controller’s reply, run maintenance actions behind an arm switch (identify, reboot, reset, change ID), and use the controller’s GPIO.
Specifications
Video
| Video standards | HDMI 1.3, HDCP 1.4 |
|---|---|
| Video encoding | H.265 / H.264 |
| Maximum resolution | 1920×1200 @ 60 Hz 4:4:4 |
| Colour depth | Input: 8/10/12-bit (1080p); output: 8-bit |
| Video wall | Up to 9×9 |
Audio
| Audio | LPCM 2.0CH (32 / 44.1 / 48 kHz) |
|---|
Network
| Network | Standard 100M/1G network switch |
|---|---|
| Transmission distance | 100 m / 328 ft via a single Cat5e/6/7 cable |
Electrical
| Power | PoE (802.3af Class 3, PD) or 12 V/1 A DC locking |
|---|
Variants
| Variant | Weight (kg) | Connections | Power consumption | Dimensions | Enclosure |
|---|---|---|---|---|---|
| PixelGrid Flex HD Encoder | 0.295 | 1× HDMI in, 1× LAN (RJ45 with PoE), 1× audio in/out (Phoenix), 1× RS-232 | 2.88 W max | 120 × 95 × 21.5 mm (W × D × H) | Metal, black |
| PixelGrid Flex HD Decoder | 0.295 | 1× HDMI out, 1× LAN (RJ45 with PoE), 1× audio out (Phoenix), 1× RS-232 | 2.88 W max | 120 × 95 × 21.5 mm (W × D × H) | Metal, black |
| PixelGrid Flex HD Control |
Downloads for PixelGrid Flex HD
| File | Software | Size | Updated | View or download |
|---|---|---|---|---|
| Q-SYS plugin Control plugin Version 1.0.1 In Q-SYS Designer the plugin is listed under PixelPlus → PixelGrid Flex HD. | Q-SYS Q-SYS Designer 10 or later | 107 KB | 11 November 2026 | Download Q-SYS plugin for PixelGrid Flex HD |
| PixelGrid Flex HD data sheet Data sheet | — | 581 KB | 11 November 2026 | View PixelGrid Flex HD data sheet for PixelGrid Flex HD (opens in a new tab) Download PixelGrid Flex HD data sheet for PixelGrid Flex HD |